Donnie clark → Форум
Question about Spa Glue/Cement — 30 декабря 2017
Hi,

This joint is right after an elbow that is connected to the heater outflow. The previous connection came loose after filling the tub, heating the water and running the pump. The connection at the time was a PVC flexible hose to a PVC hard pipe. It looked to me upon disassembly that the stuff that was used before was almost like a clear silicone - not sure about that.

I purchased some PVC cleaner and cement from a local spa store - IPS Weld-On P68 Primer and IPS Weld-On 700 Plastic Pipe Cement). After installing the new connection and (of course) filling and reheating the spa it let loose again (my downstairs neighbors still won't talk to me).
For More Details:
Animated video for business
Default Paludarium questions? — 30 декабря 2017
Hi,

I was doing preliminary research in building a paludarium for a few marbled newts. I was considering having a custom tank built, but seeing costs, and the amount of fun I have building my vivariums I thought I would take the challenge on.
I was first considering using egg crate as the main material for the land portion of the tank, to create a shelf basically, and then using expanding foam around it to create a pocket for substrate. That was where my first question came if expanding foam will stay attached to egg crate even exposed to water?

Please help.
Thanks!

I didn't find the right solution from the Internet.

References:http://www.dendroboard.com/forum/parts-construction/227145-paludarium-questions.html

Animated sales explainer video
Couple of Carp questions — 30 декабря 2017
Hi,
My freezer isn't really large. Also just for general info I have never cut up a fish in any manner.

After catching it how do you pick up a carp? I managed to poke myself pretty good on even a little mackerel. I have no clue how to hold anything but a bass and a catfish.

Is there a minimum size? How about limits?
Please help.
Thanks!

I didn't find the right solution from the Internet.

References:https://sdfish.com/forums/t/couple-of-carp-questions.163322/

product video content
I have 2 mature mandarin trees which are dying — 30 декабря 2017
Hi,

I see my climate mandarin at separate place in my garden is dying, I found the slug eating and living in the tree trunk.

I kill some slug but not long other slug come again.

What can I do?

Please help.
Thanks!

I didn't find the right solution from the Internet.

References:https://www.palmers.co.nz/questions

Pharmaceutical Video
Betta Decoration Question — 29 декабря 2017
Hi,

I bought a decoration I'm kind of concerned about. It's an Imaginarium Lotus Lounger from Petco. I thought it looked neat, but it's held down by attaching it to a suction cup on the bottom of the tank with fishing line. I'm worried that the fishing line will harm my betta. There is almost no information about it online, except for one person who says that their betta loves it, and one person that says the betta will learn to avoid the fishing line.

So my question: will fishing line hurt my betta? Is there an alternative that you would recommend?

Please help.
Thanks!

I didn't find the right solution from the Internet.

References:https://www.fishlore.com/aquariumfishforum/threads/betta-decoration-question.236463/

Sales Promotion Example
A lot of questions about a 20g terrarium — 29 декабря 2017
Hi,

Would NICREW LED light be enough. And I like to make the light be a few inches above the tank like 4"-6". What's the best way of going about that? If hanging would I be fine with just the 11" one or should I go for 20"?
Some of the plants I got come from the forest around here... sooo there are animals that came with them - bugs. Should I be worried? If so how do I go about killing them?

Please help.
Thanks!

I didn't find the right solution from the Internet.

References:http://www.plantedtank.net/forums/25-riparium-terrarium-vivarium/1187961-lot-questions-about-20g-terrarium.html

2d animation video
Why do aquatic species feel more comfortable in the lakes in winter than in summer? — 29 декабря 2017
Hi,

In cold winter months, lakes and rivers freeze over forming ice.
Underneath the frozen upper layer, the water remains in its liquid form and does not freeze. Also, oxygen is trapped beneath the layer of ice. As a result, fish and other aquatic animals find it possible to live comfortably in the frozen lakes and ponds.

For More Details:
product innovation video
Default Questions about setting up a false bottom — 29 декабря 2017
Hi,

it is my understanding that, to create a pond, you can cut away a section of your eggcrate, and lay the mesh over top, and then put rocks (large & smooth so they won't hurt the frog) over that instead of substrate, to create a dip in the tank that gets filled with the water from the drainage layer that is underneath the eggcrate. then, once the drainage layer gets full enough that it's soaking into the substrate which is bad, you can get a pump and drain out the extra water.

1: the frog needs dechlorinated tap water to soak in. So, if the pond is filled with the water from the drainage layer, which comes from the misting water, which is distilled how does that work? how will the water in the pond be acceptable for the frog? wouldn't it get gross from sitting in the drainage layer?

2: if there are rocks there, will the water even flow in-between the drainage layer and the pond? Should it?

Please help.
Thanks!

I didn't find the right solution from the Internet.

References:
http://www.frogforum.net/showthread.php/34555-Questions-about-setting-up-a-false-bottom

Creative marketing ads
What's Next? Death and the Afterlife — 28 декабря 2017
Hi,

The question of what happens to us after we die remains as mysterious now as it always was. Some think that death amounts to total annihilation of the self; others adhere to certain religious traditions, which teach that the immaterial soul (and, in some traditions, the resurrected body) can ultimately survive death. So how are we to judge between these radically different views of what happens to us in death?

For More Details:

Marketing Communication Examples
Why is it not put as a separate thread on ForumIAS — 28 декабря 2017
Hi,

Because I want to have exactly 1 thread for each of the hobbies that I have put. If I do this on the Forum, large number of threads on large number of hobbies by other people will flood the front page of the Forum – something @root may not tolerate/ like.

I have been discussing hobbies over PM, but it will be nice if we can have it in Public domain

It will benefit others also in the future.

For More Details:

Medical Animation
How To Ask Good Questions On Technical And Scientific Forums — 28 декабря 2017
Hi,

Asking the right questions effectively is central to the pursuit of science and posting questions to online forums is a great way to improve that skill. Furthermore, knowing how to use forums is a great asset for your scientific career: it will help you overcome obstacles faster and connect with people who are doing similar research [1]. However, in order to get the most out of online forums, you must first learn how to ask good questions.

For More Details:
B2B Marketing Campaign Examples
Why do you want to study medicine and be a doctor? — 28 декабря 2017
Hi,

There are lots of threads (forever increasing in number) asking questions like:

"Why do you all want to study medicine?"
"Why do you want to be a doctor?"
"What inspired you to study medicine?"

Please help.
Thanks!

I didn't find the right solution from the Internet.

References:
https://www.thestudentroom.co.uk/showthread.php?t=1959718

Blockchain Marketing
Question about joining pvc with cement — 27 декабря 2017
Hi,

m making a rex grigg type reactor and am wondering about joining the pvc fittings with the pipe
Regarding the use of pvc cement, i take it using a primer is a must, should i go for pressure cement or non pressure?
When i make the joints should i go piece by piece ie join pipe to coupling then let it cure, join fitting to coupling and cure etc ?

Please help.
Thanks!

I didn't find the right solution from the Internet.

References:
http://www.plantedtank.net/forums/20-diy/929097-question-about-joining-pvc-cement.html

Sales Promotional Video Animation
Welcome to OZx Forum — 27 декабря 2017
Hi,

Wouldn't it be nice if I would call you by your name or nickname of your choice ?

Like most online communities you must register to post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of OZx Forum by signing in or creating an account.

For More Details:

Promo Video Animation
question for experienced Endler Livebearer owners/breeders — 27 декабря 2017
Hi,

My question here is that I noticed that near the end of her labor she popped out 4 still born /unfertilized fetuses. Is this normal for the endler or other livebearing fish or did my moving her while carrying cause her to prematurely drop before she was ready and the fry were fully developed?
Please help.
Thanks!

I didn't find the right solution from the Internet.

References:http://albertaaquatica.com/index.php?/topic/25850-question-for-experienced-endler-livebearer-ownersbreeders/


Cryptocurrency Advertising

← Назад